Microsoft Dynamics 365 Supply Chain Management Functional Consultant - MB-330 Exam Questions
QUESTION NO: 1
You need to configure the requirements for VendorC.
What should you configure? To answer, move the appropriate features to the correct requirement types. You may use each feature once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
You need to configure the requirements for VendorC.
What should you configure? To answer, move the appropriate features to the correct requirement types. You may use each feature once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
QUESTION NO: 2
A distribution company is implementing Dynamics 365 Supply Chain Management.
The company plans to expand into providing trucking services for its primary distribution center. The company may expand into other locations later.
All vehicle maintenance will be performed at standardized intervals to meet trucking regulations.
The vehicles must be established on the maintenance schedule at the distribution center. The fleet manager requires all vehicles to be grouped together by location for the distribution center and by sublocations for any hubs.
The company requires the following implementation:
* Sublocations must inherit the maintenance schedule.
* Non-vehicle assets must not inherit the maintenance schedule.
You need to configure the system to meet the requirements. What should you configure?
A distribution company is implementing Dynamics 365 Supply Chain Management.
The company plans to expand into providing trucking services for its primary distribution center. The company may expand into other locations later.
All vehicle maintenance will be performed at standardized intervals to meet trucking regulations.
The vehicles must be established on the maintenance schedule at the distribution center. The fleet manager requires all vehicles to be grouped together by location for the distribution center and by sublocations for any hubs.
The company requires the following implementation:
* Sublocations must inherit the maintenance schedule.
* Non-vehicle assets must not inherit the maintenance schedule.
You need to configure the system to meet the requirements. What should you configure?
Correct Answer: C
QUESTION NO: 3
A company is implementing Dynamics 365 Supply Chain Management.
The company requires that historical transactional data from the current system be used to determine future inventory needs. Transactions that fall outside of a standard deviation must be excluded.
You need to configure the system to meet the requirements.
What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
A company is implementing Dynamics 365 Supply Chain Management.
The company requires that historical transactional data from the current system be used to determine future inventory needs. Transactions that fall outside of a standard deviation must be excluded.
You need to configure the system to meet the requirements.
What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Box 1: Safety stock journal
Safety stock indicates an additional quantity of an item that is held in inventory to help reduce the risk that the item will go out of stock. Safety stock is used as a buffer in case sales orders come in, but the supplier can ' t meet the customer ' s requested ship date.
Safety stock indicates an additional quantity of an item that is held in inventory to help reduce the risk that the item will go out of stock. Safety stock is used as a buffer in case sales orders come in, but the supplier can ' t meet the customer ' s requested ship date.
You can to use the safety stock journal to calculate minimum coverage proposals based on historical transactions and then update the item coverage with the proposals.
Box 2: Demand forecasting
Key features of demand forecasting
Here are some of the main features of demand forecasting:
Generate a statistical baseline forecast that is based on historical data.
Use a dynamic set of forecast dimensions.
Visualize demand trends, confidence intervals, and adjustments of the forecast.
Authorize the adjusted forecast to be used in planning processes.
Remove outliers.
Create measurements of forecast accuracy.
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/safety-stock- replenishment
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/introduction-demand-forecasting
QUESTION NO: 4
A company is setting up a budget control system to improve financial management. The company completes the following initial steps:
Defined financial dimensions
Set default time intervals
Configured basic budgeting parameters
The company requires the budget control functionality to monitor and compare the actual expenditures to the budgeted amounts.
You need to configure the budget control configuration linked to the budgeted amount so that the system can effectively monitor and compare actual expenditures to budgeted amounts.
What should you do next?
A company is setting up a budget control system to improve financial management. The company completes the following initial steps:
Defined financial dimensions
Set default time intervals
Configured basic budgeting parameters
The company requires the budget control functionality to monitor and compare the actual expenditures to the budgeted amounts.
You need to configure the budget control configuration linked to the budgeted amount so that the system can effectively monitor and compare actual expenditures to budgeted amounts.
What should you do next?
Correct Answer: A
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 5
A company that uses Dynamics 365 Supply Chain Management recently became ISO 9001-certified.
The company must begin documenting nonconformances.
You need to configure the nonconformance functionality.
Which three features must you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A company that uses Dynamics 365 Supply Chain Management recently became ISO 9001-certified.
The company must begin documenting nonconformances.
You need to configure the nonconformance functionality.
Which three features must you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
Correct Answer: A,C,E
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 6
A company uses Dynamics 365 Supply Chain Management. A group of machines requires monthly maintenance that includes the replacement of spare parts such as belts and oil.
A subset of the machines also has existing maintenance requests. The service manager is concerned that an insufficient number of technicians and parts are available to complete the requests.
The company must determine the following:
The impact of upcoming work orders prior to scheduling.
The spare parts required for existing maintenance orders.
You need to determine the required forecasting.
A company uses Dynamics 365 Supply Chain Management. A group of machines requires monthly maintenance that includes the replacement of spare parts such as belts and oil.
A subset of the machines also has existing maintenance requests. The service manager is concerned that an insufficient number of technicians and parts are available to complete the requests.
The company must determine the following:
The impact of upcoming work orders prior to scheduling.
The spare parts required for existing maintenance orders.
You need to determine the required forecasting.
Correct Answer:
Explanation:
QUESTION NO: 7
A distribution company wants to set up barcodes in their Dynamics 365 Supply Chain Management system for warehouse scanning.
Barcodes will be entered manually.
You need to minimize the risk of errors on barcode entry.
What should you do?
A distribution company wants to set up barcodes in their Dynamics 365 Supply Chain Management system for warehouse scanning.
Barcodes will be entered manually.
You need to minimize the risk of errors on barcode entry.
What should you do?
Correct Answer: A
QUESTION NO: 8
A company plans to create a product that contains multiple bill of materials (BOM) levels. The product has several components that have both constant and variable costs.
You need to calculate the planned cost for producing the product with manufacturing volumes.
Which explosion mode should you select?
Select only one answer.
A company plans to create a product that contains multiple bill of materials (BOM) levels. The product has several components that have both constant and variable costs.
You need to calculate the planned cost for producing the product with manufacturing volumes.
Which explosion mode should you select?
Select only one answer.
Correct Answer: A
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 9
Note: This question is part of a series of questions that present the same scenario- Each question in the series contains a unique solution that might meet the stated goals.
A company uses Dynamics 365 Supply Chain Management to item returns.
You need to ensure that the original quantity and price from a sales order is used for return orders.
Solution: Create a Sales Order that uses the returned order sales type.
Does the solution meet the goal?
Note: This question is part of a series of questions that present the same scenario- Each question in the series contains a unique solution that might meet the stated goals.
A company uses Dynamics 365 Supply Chain Management to item returns.
You need to ensure that the original quantity and price from a sales order is used for return orders.
Solution: Create a Sales Order that uses the returned order sales type.
Does the solution meet the goal?
Correct Answer: B
QUESTION NO: 10
A company uses Dynamics 365 Supply Chain Management. The company plans to add trucks to the existing truck fleet over the upcoming months.
The company requires truck drivers to complete a daily self-inspection of their trucks. The government requires that commercial trucks are inspected annually by a certified repair facility.
The fleet manager wants to minimize the amount of time the truck is in the shop.
* When a truck driver reports a problem during the daily inspection that requires a repair and is within a week of the annual inspection, the company requires that both events occur at the same time in the shop.
* The annual inspection can vary on due date for both new and existing trucks.
You must configure the requirements to minimize truck downtime.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
A company uses Dynamics 365 Supply Chain Management. The company plans to add trucks to the existing truck fleet over the upcoming months.
The company requires truck drivers to complete a daily self-inspection of their trucks. The government requires that commercial trucks are inspected annually by a certified repair facility.
The fleet manager wants to minimize the amount of time the truck is in the shop.
* When a truck driver reports a problem during the daily inspection that requires a repair and is within a week of the annual inspection, the company requires that both events occur at the same time in the shop.
* The annual inspection can vary on due date for both new and existing trucks.
You must configure the requirements to minimize truck downtime.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
QUESTION NO: 11
A warehouse picks and ships product.
The warehouse completes work immediately upon automatic release to the warehouse.
You need to configure waves to allow for automatic work creation.
What should you do?
A warehouse picks and ships product.
The warehouse completes work immediately upon automatic release to the warehouse.
You need to configure waves to allow for automatic work creation.
What should you do?
Correct Answer: A
QUESTION NO: 12
A company is implementing asset management in Dynamics 365 Supply Chain Management.
The company manually assigns workers to work orders. The quality of maintenance suffers due to the manual assignment process.
The company requires preferred maintenance workers to be assigned to a given work order based on specific criteria.
You need to assign the workers to work orders.
Which criteria should you use?
A company is implementing asset management in Dynamics 365 Supply Chain Management.
The company manually assigns workers to work orders. The quality of maintenance suffers due to the manual assignment process.
The company requires preferred maintenance workers to be assigned to a given work order based on specific criteria.
You need to assign the workers to work orders.
Which criteria should you use?
Correct Answer: A
QUESTION NO: 13
A company uses planning optimization in Dynamics 365 Supply Chain Management A new item is set up for production with a bill of materials (BON ' ) and is included in planning optimization.
You need to identify the planning output for the item
What are two parts of the output? Each answer represents a partial solution
A company uses planning optimization in Dynamics 365 Supply Chain Management A new item is set up for production with a bill of materials (BON ' ) and is included in planning optimization.
You need to identify the planning output for the item
What are two parts of the output? Each answer represents a partial solution
Correct Answer: B,D
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
