HP Fast Track - Applying Aruba Switching Fundamentals for Mobility

QUESTION NO: 1
A company has a cluster of Aruba Instant APs (lAPs). The company wants to add a new
IAP to the cluster. What should network administrators ensure before they connect the new
IAP?

A. that the DHCP server has the correct options 60 and 43 B. that the switch port for the AP is untagged for the same VLAN as the current cluster C. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC) D. that Aruba Activate is configured with provisioning rules for the IAP

Correct Answer: C

QUESTION NO: 2
The switches in the exhibit use RSTP.
The network administrator needs to add Link 2.
Why should the administrator configure Links 1 and 2 as a link aggregation?

A. 4th option Missing B. to automatically apply the settings already configured for Link 1 to Link 2 C. to share traffic more evenly over both links D. to prevent a loop from occurring

Correct Answer: C

QUESTION NO: 3
A company wants to use Zero Touch Provisioning (ZTP) to provision new ArubaOS switches.
Which AirWave settings must match the switch default SNMP and Telnet/SSH password settings?

A. Settings in the device template for the device group to which ZTP switches are assigned B. Communication settings for the device group to which ZTP switches are assigned C. Global communication settings D. Credentials in device discovery settings

Correct Answer: D

QUESTION NO: 4

Which behavior does Switch-1 exhibit on its link aggregations?

A. It sends an SNMP probe to Switch-2 and Swrtch-3 to determine whether it needs to shut down any of these ports. B. It load shares traffic on both ports in each LACP link aggregation, which leads to loops and network disruption. C. It uses LACP to dynamically detect that ports 1 and 3 belong in trk 1. and ports 2 and 4 belong in trk2. D. It blocks one or both ports in each link aggregation due to errors detected by LACP.

Correct Answer: D

QUESTION NO: 5
Which devices must support Multi-User Multiple Input Multiple Output (MU MIMO) in order for an AP to transmit to multiple clients simultaneously?

A. all of the APs in a WLAN. but none of the clients B. the transmitting AP and all of the clients that receive simultaneous transmissions C. the transmitting AP and at least one of the clients that receives simultaneous transmissions D. the transmitting AP and all of the clients

Correct Answer: B

QUESTION NO: 6

An ArubaOS switch has the routing table shown in the exhibit.
A network administrator then enters this command:
Switch (config) # ip routs 10.0.0.0/8 10.1.104.2
After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8.13.
What does the switch do with this traffic?

A. It forwards all of the traffic to 10.1.101.1. B. It forwards at of the traffic to 10.1.104.2. C. It load balances some of the traffic to 10.1.101.1 and some to 10.1.104.2. D. It drops the traffic.

Correct Answer: D

QUESTION NO: 7

This ArubaOS switch receives traffic without a VLAN tag on a switch port 1.
The traffic is destined to a MAC address learned on port 2.
What does the switch do with the traffic?

A. It forwards the traffic on port 2 without a VLAN tag. B. It floods the traffic on port 2 on all VLANs. C. It forwards the traffic on port 2 with a VLAN tag of 5. D. It drops the traffic.

Correct Answer: D

HP Fast Track - Applying Aruba Switching Fundamentals for Mobility - HPE2-Z39 Exam Questions