
Huawei HCIE-WLAN (Written) V1.0 - H12-351_V1.0 Exam Questions
QUESTION NO: 1
Which of the following statements about fingerprint-based positioning technology are true? (Select All that Apply)
Which of the following statements about fingerprint-based positioning technology are true? (Select All that Apply)
Correct Answer: C,D
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 2
After rogue device detection is enabled, an AP monitors all 802.11 packets from among the data packets and checks the DS fields in the packets to determine whether the device is an ad-hoc device, wireless bridge, STA, or AP. In an 802.11 MAC frame, the To DS field is set to 0 and the From DS field is set to 1 in the Frame Control field. Which of the following is the corresponding device type?
After rogue device detection is enabled, an AP monitors all 802.11 packets from among the data packets and checks the DS fields in the packets to determine whether the device is an ad-hoc device, wireless bridge, STA, or AP. In an 802.11 MAC frame, the To DS field is set to 0 and the From DS field is set to 1 in the Frame Control field. Which of the following is the corresponding device type?
Correct Answer: D
QUESTION NO: 3
No data is displayed on the Telemetry management page of (Master NCE-Campuslnsight. Which of the following are possible causes?
No data is displayed on the Telemetry management page of (Master NCE-Campuslnsight. Which of the following are possible causes?
Correct Answer: A,B,C,D,E
QUESTION NO: 4
Match the following common WLAN issues with the correct optimization suggestions.

Match the following common WLAN issues with the correct optimization suggestions.

Correct Answer:


QUESTION NO: 5
In an HSB scenario, WIDS entries on the active WAC cannot be backed up to the standby WAC. After an active/standby switchover, WIDS entries are lost.
In an HSB scenario, WIDS entries on the active WAC cannot be backed up to the standby WAC. After an active/standby switchover, WIDS entries are lost.
Correct Answer: B
QUESTION NO: 6
Which of the following items is not involved in the HLD phase?
Which of the following items is not involved in the HLD phase?
Correct Answer: D
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 7
DHCPv6 stateful autoconfiguration enables a DHCPv6 server to automatically assign IPv6 addresses, PD prefixes, and other network configuration parameters, such as DNS, NIS, and SNTP server address.
DHCPv6 stateful autoconfiguration enables a DHCPv6 server to automatically assign IPv6 addresses, PD prefixes, and other network configuration parameters, such as DNS, NIS, and SNTP server address.
Correct Answer: B
QUESTION NO: 8
In a multicast solution, there must be reachable unlcast routes between multicast sources and receivers.
In a multicast solution, there must be reachable unlcast routes between multicast sources and receivers.
Correct Answer: A
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 9
In the Huawei CloudCampus Solution, when cloud managed devices register with iMaster NCE-Campus in DHCP option mode, which of the following options is used to obtain the IP address of iMaster NCE-Campus?
In the Huawei CloudCampus Solution, when cloud managed devices register with iMaster NCE-Campus in DHCP option mode, which of the following options is used to obtain the IP address of iMaster NCE-Campus?
Correct Answer: B
QUESTION NO: 10
Master NCE-Campuslnsight can comprehensively record and analyze Interference. Which of the following parameters are recorded? (Select All that Apply)
Master NCE-Campuslnsight can comprehensively record and analyze Interference. Which of the following parameters are recorded? (Select All that Apply)
Correct Answer: B,C,D
Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).
QUESTION NO: 11
In DHCPv6 stateful autoconfiguration, if a DHCPv6 client receives Advertise messages from multiple DHCPv6 servers, the client selects the DHCPv6 server with the highest priority. Then which of the following type of messages does the client send to all DHCPv6 servers?
In DHCPv6 stateful autoconfiguration, if a DHCPv6 client receives Advertise messages from multiple DHCPv6 servers, the client selects the DHCPv6 server with the highest priority. Then which of the following type of messages does the client send to all DHCPv6 servers?
Correct Answer: A
QUESTION NO: 12
When planning WLAN outdoor coverage using external 2.4 GHz omnidirectional antennas with 3 dBi gain, what is the recommended coverage radius?
When planning WLAN outdoor coverage using external 2.4 GHz omnidirectional antennas with 3 dBi gain, what is the recommended coverage radius?
Correct Answer: A
QUESTION NO: 13
Campuslnsight draws the client access journey based an the client access history, and displays the following Information: access AP. frequency band, SSIO, client IP address, roaming information, as well as the time required for association, authentication, and DHCP.
Campuslnsight draws the client access journey based an the client access history, and displays the following Information: access AP. frequency band, SSIO, client IP address, roaming information, as well as the time required for association, authentication, and DHCP.
Correct Answer: B
QUESTION NO: 14
In Huawei ' s wireless load balancing solution, a static load balancing group supports a maximum of_____members. (Enter only digits.)
In Huawei ' s wireless load balancing solution, a static load balancing group supports a maximum of_____members. (Enter only digits.)
Correct Answer:
16
QUESTION NO: 15
VXLAN uses a VXLAN Network Identifier (VNI) field similar to a VLAN ID to identify users. The VNI field occupies 28 bits and supports up to 16M VXLAN segments.
VXLAN uses a VXLAN Network Identifier (VNI) field similar to a VLAN ID to identify users. The VNI field occupies 28 bits and supports up to 16M VXLAN segments.
Correct Answer: A




