EMC Dell PowerEdge Foundations 2023 - D-PE-FN-23 Exam Questions [2026]

QUESTION NO: 1
An administrator wishes to create a large complex RAID set for a write intensive application that balances performance and cost.
Which complex RAID Level should be used?

A. RAID 50 B. RAID 5 C. RAID 10 D. RAID 60

Correct Answer: A

QUESTION NO: 2
What is a consideration for a hardware administrator who is physically installing multiple servers into a rack?

A. Avoid unevenly loading the rack and creating a hazard. B. Observe load requirements specified in documentation for the switch. C. Ensure that the associated UPS can also power the top-of-rack switch. D. Ensure that the server can connect to Windows updates

Correct Answer: A

QUESTION NO: 3
What advantage do NVDIMMs have over other server-based memory technologies?

A. Can retain contents even after a power loss B. Operate at lower voltages to save on power costs. C. Require less cooling than traditional memory DIMMs D. Lower cost per GB of capacity

Correct Answer: A

QUESTION NO: 4
What is maximum number of iDRAC Virtual Console sessions that can be run simultaneously?

A. 6 B. 5 C. 7 D. 4

Correct Answer: A

QUESTION NO: 5
What is the name of the log generated by SupportAssist?

A. Technical Support Log B. Support Assist Report C. Technical Support Report D. Support Assist Log

Correct Answer: C

QUESTION NO: 6
What are the first two steps to configure RAID from System Setup?

A. Select Create Virtual Disk from the Main Menu.
Select Create Virtual Disks. B. Select Configuration Management.
Select Physical Disks. C. Select the PERC controller from the Device Settings.
Select Configuration Management. D. Select Create Virtual Disks.
Select PERC controller.

Correct Answer: C

QUESTION NO: 7
What is the correct order of steps to configure a Dell PowerEdge server for HTTP boot in UEFI mode?
Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.

A. a) Select HTTP Device Settings.
b) Select System BIOS and Boot Settings.
c) Select UEFI for Boot Mode.
d) Boot into F2 System Setup.
e) Select System BIOS and Network Settings.
f) Select Finish and Reboot Server into System Setup. B. a) Select System BIOS and Network Settings.
b) Select UEFI for Boot Mode.
c) Boot into F2 System Setup.
d) Select System BIOS and Boot Settings.
e) Select HTTP Device Settings.
f) Select Finish and Reboot Server into System Setup. C. a) Select UEFI for Boot Mode.
b) Select Finish and Reboot Server into System Setup.
c) Boot into F2 System Setup.
d) Select HTTP Device Settings.
e) Select System BIOS and Network Settings.
f) Select System BIOS and Boot Settings. D. a) Select HTTP Device Settings.
b) Boot into F2 System Setup.
c) Select UEFI for Boot Mode.
d) Select System BIOS and Boot Settings.
e) Select System BIOS and Network Settings.
f) Select Finish and Reboot Server into System Setup. E. a) Select UEFI for Boot Mode.
b) Select HTTP Device Settings.
c) Boot into F2 System Setup.
d) Select System BIOS and Boot Settings.
e) Select System BIOS and Network Settings.
f) Select Finish and Reboot Server into System Setup. F. a) Select HTTP Device Settings.
b) Select System BIOS and Network Settings.
c) Boot into F2 System Setup.
d) Select System BIOS and Boot Settings.
e) Select UEFI for Boot Mode.
f) Select Finish and Reboot Server into System Setup.

Correct Answer: E

QUESTION NO: 8
Which technical concept does Disk Mirroring use?

A. Division of data into blocks and spreading the data across hard drives B. Duplication of system components for backup in case of failure C. Calculation of data from at least two disks that is stored on another disk D. Duplication of data across separate hard drives

Correct Answer: D

QUESTION NO: 9
Which technology currently offered by Dell EMC will allow the customer to store large amounts of data to meet their long-term requirements?

A. SDLT B. LTO C. SAIT D. DAT

Correct Answer: B

QUESTION NO: 10
An IT architect is asked to provide a Dell EMC modular infrastructure that offers the most powerful and scalable computing capabilities and works with virtually any network, storage, or management infrastructure.
Which product should they choose?

A. FC640 B. FX2 C. MX7000 D. VRTX

Correct Answer: C

QUESTION NO: 11
Which error control technique is used by ECC memory?

A. Checksums B. Repetition codes C. Hamming code D. Cryptographic hash functions

Correct Answer: C