Cisco Implementing Cisco Wireless Network Fundamentals

QUESTION NO: 1
Refer to the exhibit.

When the Admin Status of an access port is enabled, what does this mean in radios?

A. 802.11a/n/ac and 802.11b/g/n radios can be UP or DOWN B. 802.11a/n/ac and 802.11b/g/n radios must be UP C. 802.11a/n/ac is DOWN, but the 802.11b/g/n radios is UP by default D. 802.11a/n/ac is UP, but the 802.11b/g/n radios is DOWN by default

Correct Answer: A

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 2
Which two options are limitations when configuring basic security on an autonomous AP using the express security page setup? (choose two)

A. Delete all the SSIDs B. You need multiple SSIDs C. Use multiple authentication servers D. You cannot change the default SSID E. Edit the SSIDs

Correct Answer: C,E

QUESTION NO: 3
If an antenna has a dbd of 8.6, what is the dbi value?

A. 6.46 B. 12.88 C. 6.2 D. 8.6 E. 10.74

Correct Answer: E

QUESTION NO: 4
On which tab in a WLC is the RADIUS server configured

A. Security B. Controller C. Management D. Wireless

Correct Answer: A

QUESTION NO: 5
Refer to the exhibit.

Given the WLC data rate configuration, a control frame is sent at which speed?

A. 9 Mbps B. 48 Mbps C. 54 Mbps D. 12 Mbps

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 6
Refer to the exhibit.

You select the WPS Pin Entry option on an Android device. Which step in the connection process is next?

A. Enter the verification code on the Wi-Fi router. B. Enter the WEP/WPA key on the device. C. Push the WPS button on the router. D. Enter the verification code on the device.

Correct Answer: C

QUESTION NO: 7
The EolP tunnel between anchor and foreign controllers is not functioning. Which two ports and protocols must be open to enable the tunnel to form? (Choose two)

A. UDP port 5247 B. UDP port 16666 C. UDP port 5246 D. IP 97 E. UDP port 1646

Correct Answer: B,D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 8
Refer to the exhibit. Which type of roaming is shown, assuming that WLC1 and WLC2 belong to the same mobility group?

A. Layer 2 intercontroller B. Layer 3 intercontroller C. Layer 3 intercontroller D. Layer 2 intercontroller

Correct Answer: A

QUESTION NO: 9
Which two commands needed to ensure that Cisco WLC can be managed only via a secure web browser, with a cipher of 128 bits or larger and without Telnet or SSH?
(Choose two)

A. config network ssh disable B. config network webmode enable C. config network secureweb cipher-option sslv2 di D. config network secureweb enable E. config network secureweb cipher-option high enable

Correct Answer: D,E

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 10
Refer to the exhibit.

Which action must you complete during the AUTHCHECK state of the PEM process?

A. The controller must learn the IP address of the client by using ARP B. The client must authenticate by using WEP C. The WLAN must enforce a Layer 2 authentication policy on the client. D. The WLAN must enforce a Layer 3 authentication policy on the client

Correct Answer: D

QUESTION NO: 11
An AP using version 8.0 broadcasts a layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?

A. Send a discovery request using DHCP option 43. B. Send a discovery request using locally using stored information on the AP. C. Send a discovery request using DNS. D. Determine if the controller responses include the primary controller.

Correct Answer: B

QUESTION NO: 12
You have created a new WLAN. However, no client can connect and the SSID does not appear on the available wireless networks. Which statements describes the cause of the issue?

A. The WLAN has the Wrong NAS-ID. B. The WLAN is not broadcasting. C. The WLAN is mapped to an incorrect interface or interface group. D. The WLAN controller needs a restart for the new configuration to take effect.

Correct Answer: B

QUESTION NO: 13
When an AP is in its default configuration mode and connects to a cisco WLC, which methods are available for remote management access to an AP?

A. SSH only B. HTTPS, and SSH C. SSH and Telnet D. SSH and Telnet are available only after configuration by a Cisco version 7.0

Correct Answer: C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 14
You must view the SSIDs, channels, and signal strength for the 802.11 radio coverage area of a smartphone or a tablet. Which two Wi-Fi scanner do you see?(Choose two)

A. a Wi-Fi analyzer B. Wireshark C. Windows wireless utility D. the Apple AirPort Utility E. Cisco CleanAir

Correct Answer: A,D

Cisco Implementing Cisco Wireless Network Fundamentals - 200-355 Exam Questions