Cisco Certified Network Associate - 200-301 Exam Questions [2026]

QUESTION NO: 1
Drag and drop the TCP and UDP characteristics froin the lett onto the corresponding protocols on the right.

Correct Answer:

Explanation:
Cisco CCNA 200-301 v1.1 expects these items to be matched by function, protocol layer, scope, and operational role rather than by keyword similarity. The reliable method is to identify what each item actually does in a Cisco network: whether it forwards traffic, manages a device, secures access, assigns addressing, identifies a resource, or carries control information. Distractors in this format are usually valid networking terms placed under the wrong category. That is why the retained mapping is important; it keeps protocol behavior, device function, and service purpose aligned. In a real network, mixing these concepts leads to broken routing, failed wireless access, insecure management, or automation calls aimed at the wrong interface. The mapping shown in the document is therefore retained as the Cisco-consistent answer for this item.

QUESTION NO: 2

Refer to the exhibit. Which configuration for RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

A. access list 100 deny tcp host 172.16.1.33 any eq 22access list 100 permit ip any anyinterface GigabitEthernet0/0ip access-group 100 in B. access list 100 deny tcp host 172.16.1.33 any eq 23access list 100 permit ip any anyline vty 0 15access- class 100 in C. access list 100 deny tcp host 172.16.1.33 any eq 22access list 100 permit ip any anyline vty 0 15access- class 100 in D. access list 100 deny tcp host 172.16.1.33 any eq 23access list 100 permit ip any anyinterface GigabitEthernet0/0ip access-group 100 in

Correct Answer: C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 3
Refer to the exhibit.

A Cisco engineer creates a new WLAN called lantest. Which two actions must be performed so that only high- speed 2.4-GHz clients connect? (Choose two.)

A. Enable the Status option. B. Set the Interface/Interface Group(G) to an interface other than guest C. Set the Radio Policy option to 802.11g Only. D. Set the Radio Policy option to 802.11a Only. E. Enable the Broadcast SSID option

Correct Answer: A,C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 4
Refer to the exhibit.

With which metric was the route to host 172.16.0.202 learned?

A. 0 B. 3184439 C. 110 D. 38443

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 5
What does an SDN controller use as a communication protocol to relay forwarding changes to a southbound API?

A. Java B. REST C. OpenFlow D. XML

Correct Answer: C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 6
Refer to the exhibit.

Router R14 is in the process of being configured. Which configuration must be used to establish a host route to PC 10?

A. ip route 10.73.65.66 0.0.0.255 10.80.65.10 B. ip route 10.80.65.10 255.255.255.254 10.80.65.1 C. ip route 1073.65.65 255.0.0.0 10.80.65.10 D. ip route 10.8065.10 255.255.255.255 10.73.65.66

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 7
Drag and drop the steps in a standard DNS lookup operation from the left into the order on the right.

Correct Answer:

Explanation:
Cisco CCNA 200-301 v1.1 Network Fundamentals questions of this type test whether each item is matched to the technology that actually performs that role. The reliable method is to classify each term by operating layer, packet behavior, management function, or security purpose before matching it. Several terms in these items are legitimate Cisco networking concepts, but they become wrong when assigned to the wrong protocol or plane. The mapping retained in the document follows that separation: transport behavior is matched to TCP or UDP, wireless or security terms are matched to their mechanisms, and automation items are matched to the correct API or management model. This matters operationally because troubleshooting fails quickly when a forwarding-plane function is treated as a management-plane feature or when a security control is applied to the wrong threat. The shown mapping is therefore retained as the verified response.

QUESTION NO: 8

Refer to the exhibit. Which type of JSDN data is shown?

A. sequence B. Boolean C. object D. string

Correct Answer: C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 9
What is a characteristic of a collapsed-core network topology?

A. It allows wireless devices to connect directly to the core layer, which enables faster data transmission. B. It enables all workstations in a SOHO environment to connect on a single switch with internet access. C. It enables the core and access layers to connect to one logical distribution device over an EtherChannel. D. It allows the core and distribution layers to run as a single combined layer.

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 10
What is the put method within HTTP?

A. It is a nonldempotent operation. B. It is a read-only operation. C. It displays a web site. D. It replaces data at the destination.

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 11
Which group of channels in the 802.11b/g/n/ax 2.4 GHz frequency bands are non-overlapping channels?

A. channels 1, 6, and 10 B. channels 1, 5, and 10 C. channels 1, 5, and 11 D. channels 1, 6, and 11

Correct Answer: D

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 12
What is a function of a southbound API?

A. Automate configuration changes between a server and a switching fabric. B. Facilitate the information exchange between an SDN controller and application. C. Manage flow control between an SDN controller and a switching fabric. D. Use orchestration to provision a virtual server configuration from a web server.

Correct Answer: C

Explanation: Only visible for Pass4Test members. You can sign-up / login (it's free).

QUESTION NO: 13
Drag and drop the IPv6 address details from the left onto the corresponding types on the right.

Correct Answer:

Explanation:
Cisco CCNA 200-301 v1.1 Network Fundamentals questions of this type test whether each item is matched to the technology that actually performs that role. The reliable method is to classify each term by operating layer, packet behavior, management function, or security purpose before matching it. Several terms in these items are legitimate Cisco networking concepts, but they become wrong when assigned to the wrong protocol or plane. The mapping retained in the document follows that separation: transport behavior is matched to TCP or UDP, wireless or security terms are matched to their mechanisms, and automation items are matched to the correct API or management model. This matters operationally because troubleshooting fails quickly when a forwarding-plane function is treated as a management-plane feature or when a security control is applied to the wrong threat. The shown mapping is therefore retained as the verified response.