HPE Network Switching Associate - HPE6-A86 Exam Questions

QUESTION NO: 1
Based on the given output:
router ospf 1
redistribute connected route-map ospf-redist
area 0.0.0.0
Which HPE Aruba Networking CX switch can be used to create this configuration?

QUESTION NO: 2
You are discussing the central management options for HPE Aruba Networking CX switches with a customer.
How would you describe HPE Aruba Networking Central as a solution?

QUESTION NO: 3
A CX 6200 VSF stack is the Layer 3 gateway for a mid-sized company. Users are divided into three different subnets on VLANs 100, 200, and 300. VLAN 50 contains a management network for access points, switches, and DHCP servers.
How do the access points get an IP address using DHCP?

QUESTION NO: 4
A retail store chain customer is replacing 1,496 AOS-S switches with HPE Aruba Networking CX 6000 switches. The customer is interested in using ZTP to provision the new switches. However, they are concerned about when the switch starts the ZTP process and whether ZTP may change configurations on switches that are already deployed.
What would address this concern?

QUESTION NO: 5
You are checking the interface details for an access point that cannot reach HPE Aruba Networking Central.
After reviewing the following output, which statement is true?
Interface 1/1/16 is down
Admin state is up
State information: Waiting for link
Link state: down for 5 seconds
Link transitions: 0
Description:
Hardware: Ethernet, MAC Address: 38:bd:7a:6d:73:7f
MTU 1500
Type 1GbT
Full-duplex
qos trust dscp
Speed 0 Mb/s
Auto-negotiation is on
Energy-Efficient Ethernet is disabled
Flow-control: off
Error-control: off
MDI mode: none
VLAN Mode: native-untagged
Native VLAN: 10
Allowed VLAN List: 10,20,30
Rate collection interval: 300 seconds

QUESTION NO: 6
A customer has a skilled internal DevOps team with extensive Python programming knowledge.
Which HPE Aruba Networking CX switch would you recommend for the customer to support self-made or HPE Aruba Networking-provided scripts for onboard analytics?

QUESTION NO: 7
A newly connected 500 Series access point is not visible in HPE Aruba Networking Central. You have run the following commands to troubleshoot:
Access-1# show run int vlan 10
interface vlan10
description Infrastructure Management
ip address 10.80.10.1/24
ip helper-address 10.200.10.51
exit
Access-1# show run int 1/1/1
interface 1/1/1
no shutdown
description Access Point
vlan trunk native 10
vlan trunk allowed 10,20,30
exit
Access-1# show lldp neighbor-info 1/1/1
Port : 1/1/1
Neighbor Entries : 1
Neighbor System-Name : b8:37:b2:5f:21:21
Neighbor System-Description : ArubaOS (MODEL: AP-505R), Version Aruba IAP Neighbor Management-Address : 169.254.2.58 Neighbor Port-ID : b8:37:b2:5f:21:21 Neighbor Port-DESC : eth0 Based on the output, what could be the problem?

QUESTION NO: 8
On a switched infrastructure using Spanning Tree, what entity defines the best path for traffic in an HPE Aruba Networking CX environment?

QUESTION NO: 9
How can you describe HPE Aruba Networking stacking technologies supported to a new customer focused on another vendor's products?

QUESTION NO: 10
Which statement describes static routing?